I was not in the car lol. It only foes it when the gear is first engaged...haha
Had a bad universal joint I replaced. Chatter still there. Noticed when I pulled the drive shaft that I have some plat in the input to the rear...
Um no lol. I checked voltage before and after the bulkhead as suggested and I've got 12 before and 4 after so I guess the bulkhead connection is...
Thanks for the info.
What's a bulkhead connection lol
So I took the maverick out several times today. Came back and parked it in front of my garage to tune and time it a little better. Went back...
Glad I found it to. Unfortunately the previous owner didn't have a cam card and could only remember it was a .525 lift Anderson cam..... the valve...
Ok call of the search. Dont know how I missed this in the first place but the rocker that was really loose has a broken valve spring....... I'm...
The one rocker I think I am hearing the most has a lot of movement. All of the other rockers are pretty tight but one has a lot more slop. That...
Just ran the motor with the valve cover off. All of the rockers are ticking. If I apply a little pressure with the handle of my hammer it will...
Chatter does not go away. Cant really hear it at idle but other then that always there. Doesn't sound like all the lifters but I will gave to run...
No one locally has any longer pushrods then what I have. Can I just remove the rocker arm square channel deal to increase preload?
I didn't install the motor or heads. Bought it like that. Just noticed that on a few of the pushrods I can move them up and down slightly with the...
I've been hearing some quite noise lifter chatter from the 302 in the Lincoln lately Changed the oil and filter and it didn't help at all....
Pretty sure this is a very common issue but I'll ask non the less...... Glass in my sport mirrors shakes all over the place. Driver side stays...
This is going to sound terrible but what tailshaft bushing?? LOL Bushing in the tailshaft of the trans?
The clutch has fealt pretty good. I'm not going to say its adjusted perfectly but it seems to be working fine the way it is now. Some how...
Clutch.....flywheel...and throw out bearing all new. I'll re check the u joints and report back. I was thinking that maybe the flywheel was...
So I keep hearing this chatter come from the universal joint area of the maverick. Only happens when the clutch first engages. Thought it was a...
Just one wire
Separate names with a comma.
