This is not the case, when the ignition switch is in the start position it does not supply the coil with power (9 volts), it gets that power from...
You can try to put some Marvel Mystery oil in the cylinders and let it sit for a day or so then try to turn it over with the crank bolt. As far...
Those carbs also have a linkage on the inside of the carb for the pump. Sometimes it will fall off and not work correctly.
I had to cut mine to get it to fit.
My Aunt just scanned a bunch of pics and these were in them. They are of my Uncle David and my cousin Gary. You just have to love the 70s. Mav...
Vacuum hoses OK, I will get you to where it will run correctly if you want. Hose numbers and what to do with them. 1. This is a vacuum...
I have made several comments on this subject in the past. I still find it odd that people that do this for a living will not touch our cars. As...
Easy to clear up. Just get the axle code off the data tag and see what it tells you.
Oh yea, I forgot about the black insert. Been a long time since I messed with the 73 and ups.
There is a screw in the center of the handle bezel behind the handle. Pull the handle out like you are opening the door and you will see the...
This is the one I used....
Where are you in Kansas? I have lots of parts, if you need any let me know. Well if you need any help as well. I have been doing Mavericks for a...
That is no problem to get one through a parts store. All the spec books I get for Brakes and Alignment specs they just order and give to me for...
Wagner makes a book that has all of the specs in it. Of course they make one every year so I do not think that "all" for the older vehicles are in...
I use my IR 2112 3/8 impact every day. It is a beast, the 2115 took its place. In fact I have 3 of them, 1 for use at work, 1 for home use and one...
Those look to be fender emblems (gun sights) off of a 1962 Comet.
No problem, I have a few so at least one will be here when you need it.
If you need the non power brake setup (mount and pedal assembly) I have a few just sitting on the shelf ready to put in a box and send. PM me if...
The funny thing about pic #2 and #3 is by the dates on the pics they were taken in 1976 and 1977. There is a white 4dr in both pics. Wonder if...
The grommet will fit in the hole with the assembly removed. The wiper assembly is probably the single most difficult thing to replace in your car...
Separate names with a comma.
