Late 80's mustang is an 8.8 rear will be 4 lug and to wide. You could get 96 and up explorer 8.8 rear with disc and narrow the long side
I kinda like that pass time thread idea I will have to catch up with Esampson next season and take it to the track, My guess was low 13,s hoping...
Ferry not as bad for me as you I can leave for free only pay to go home. Would like to go next season with some others at least if you break got...
Holley 650 competition series E7 heads with probably more work done than aftermarket heads would cost (done by former owner) has 2.02 valves...
Just for curiosities sake what do you guys think my Maverick should run in the quarter I have no track or even many straight roads where I am at....
I have the same clutch set up as you with a t5 and hooker comp long tube headers it is tight to linkage and pitman arm but does work well have no...
Thanks for the info I think I got it figured out now.
Well its worth a try then if they don't work on my Maverick can use on my Falcon it has a stock 5.0 . How does one go about checking the piston to...
Is it correct that crane roller rockers were used on 93 to 95 Cobras and would this be a good upgrade? I have an 87 roller motor in my Maverick...
I did not degree the cam a previous owner built the engine I think I can find that out though thanks for the info
Any idea if if 1.7 will cause issues with f303 cam and what performance gains could be expected?
I have a 87 roller motor in my Maverick with e7 heads that have had 2.02 valves added as well as some porting. The cam is an f303 the rocker arms...
I just might blow it up one day but has not happened yet had a 91 5.0 before with less aggressive tires and it held up to a lot of abuse. That...
How much power you planning on putting through the trans? I have a t5 in my Maverick with 332 horse and 332 foot pounds torque 411 gears and...
Hi al I live in Sechelt B.C. Canada. I have a 1969.5 Maverick 302 using 87 roller motor reworked heads ported larger valves etc, Dynoed at 332...
Separate names with a comma.
