Update: trying to get this resolved. I filled the bowls with gasoline and added a small amount of gasoline dye. Set the carb on the bench and the...
I have a regulator. the blue is quite noisy.
Thanks for the responses. I was concerned about the metering block!! I'm trying one more thing. I filled the bowls as usual and removed the carb....
Bryant, tried all of that!
Mojo, it is an original V8 radiator out of a low mileage maverick. I'm not saying it has never been in the shop. But, it hasn't been in the last...
Dave B, I replaced the almost 40 year old brass/copper radiator that was still working to some degree. I went with aluminum as it cools better....
The fuel level in the bowl drops slowly over several hours as seen through the site glass. It leaks into the intake, not a good thing. Trouble...
Dave B, makes sense. I purchased a 50/50 mix designed for aluminum radiators. I assume the same applies with aluminum heads.
Bryant, I wondered about the heat also. It bleeds down under both conditions. I've read about this before but nobody provides a solution.
ZZ and Bluegene, I had problems with the drain because I had to move the radiator toward the passenger side. I wonder if the 3 row fits...
I don't know if anyone has dealt with this but I'll ask anyway. I have a 625 BG road demon carb. It leaks down after shut-off. I've tried new...
I just finished this installation. And, no it is NOT a direct bolt in. See the links below for the AE and Champion radiator. Interesting that they...
I need more gas!!! Eat more beans! Seriously, Mavaholic, nice thread. You have more skill and tools than I do! Nice work.
71 Gold, tried that but difficult to tell. Even tried counting by "feel". According to my calculations with 3.80 rear gears, 7 drive teeth and...
Using the archives and some links I was able to determine how to calculate what speedometer gear is needed to recalibrate the speedometer when...
Zoomzoom, I wouldn't be surprised if on initial startup that was happening. I think GM radiators are cross-flow correct? That may explain why the...
Olerodder, got it! does anyone have trans temp numbers when running just the aux cooler and no radiator cooler? I ask because fluid transfers...
Captainmack, good results with the cooler with regard to the change in trans temps. 150 is excellent. You are running through the radiator then...
Olerodder, I've seen the cylindrical coolers but they don't get very good reviews. I considered those at one point. Typically used by the...
Captainmack, that makes more sense to me. So, the trans fluid would equiliabrate to whatever the temp of the fluid is at the bottom of the...
Separate names with a comma.
