found a new location on the firewall to relocate the solenoid...much easier to access.... [IMG] Bryant got me the harness for the speed sensor...
Did the installation today, came out very clean and nice. So I have this one which is my 12V switched ignition accessory panel and I have a...
I have a junction post on the driver's side kick panel which has a thick red wire coming from the + terminal of the battery. I was thinking of...
may not look it but made a lot of headway .... almost all the stock wire is back in, a lot of splices cleaned up, soldered most of the connections...
this is the timing cover I have if it matters.... [IMG]
I have a 5.0 stock water pump on my engine...I was told recently that the pumps work best at lower RPM's and since my car is mostly in the 3-4K...
here is one I found...says for GM but it worked well for me.... A Lisle tool.......
Bry, you always have the scientific answer! Muchas gracias
I have a small switch on my clutch pedal that I'm using as a neutral safety start. I used to have it hooked up to a relay and that hooked up to...
got to the shop and started working on the maverick, goal was to get all the wiring out of the car and make sure all the splices are cleaned up...
thanks for the help guys, helped a lot clarify that. Hopefully I can get most of the gauge wiring done tomorrow...
Got it for 370, found it on Ebay. Found a cheaper set but didnt look as good.
My auto meter electric gauge recommend a 1 AMP fuse in the 12V+ ignition wire. Since I'm gonna have 6 gauges can I run one main 12V+ ignition wire...
this is what it looks like right now [IMG]
can't wait to get my car back to this point.... [IMG]
Got some fancy shmancy Deutsch connectors. Got a lot of extra ones so we can use them at the shop for other projects as well. [IMG] the tool...
man at this time with all the crap I have left to do I might just rent a vette and show up to the race!
ordered a spare crank spacer and the wheel to trigger the EDIS fit perfectly on it...too perfect, not tight enough to be able to press it on...
thanks for the info guys.... got more wiring ripped out...well, carefully removed with the proper tools...my goal is to minimize splicing until I...
does something like this have the circuit built into it to make sure the wipers return to the correct position? [IMG]
Separate names with a comma.
