I know several people that have run B-cams with this combo. Be sure you have good valve spings (not stock), maybe run a thicker head gasket as well
Jegs or Summit would have the Edelbrock intake and carb. Guys is it 6901 hooker headers? Also, check Jegs or Summit for the distributor. All of...
efi Halebopp, the carb setup will be easier. For the added cost of installing the EFI spend your money on carbed engine upgrades. First, the...
I ran E7 heads on a lincoln motor with no valve reliefs and an 86 HO roller cam with no problems. I hear some going as high as a B cam but you...
I removed the window chrome on the 2dr several years ago using an old bottle opener. It worked great with no real damage. My question: what is...
offset or backspacing Each wheel manufacturer measures backspacing their own way. Some from the edge of the lip to the hub mounting surface...
?? Nobody has tried these yet?
what about the roller vs flat tappet A roller with the same specs as a flat tappet will produce more power. The roller ramps are far more...
Has anyone tried the 15x7 4" backspace torqlites on their maverick? I think a 245 60 15 should fit with this wheel. I had 15x7 with 3.75"...
Thanks RadMav, I think we will stay with the ford unit. It would be nice to have the wipers and dimmers on the switch. Thanks again for the response.
The existing column is damaged so it needs to be replaced. What type of newer units have you modified to fit?
Mav6714 Stick with the 87 or newer 5.0 HO engines. I'm not sure if the T-birds had these but Mustangs and Mark 7s certainly did. These blocks...
Radmav, how about a factory column with no shift lever!! The mav columns are hard to find so any factory or aftermarket unit would be great....
I did a quick search in the technical archives and didn't find much. Has anyone tried an aftermarket column in their maverick? If so, which one?...
Thanks Craig, it does slide into those tracks, correct?
It has been so long since I took this stuff out that I can't remember if there are any fasteners that hold it in place. I purchased enough window...
Well, sort of We determined that it is a problem with the carb under partial throttle. THe BG manual suggested that low float, butterfly...
j miller, it seems to be temp related. The only confusing part is it does it under partial throttle. Though it has died once while at idle. I...
scooper, I kind of agree. THe abrupt cut off implies spark!
I'll give that a try. After the full throttle tire roasting I'm beginning to believe it may not be electrical.
Separate names with a comma.
