brakes How old are the brake shoe springs? They are what makes the shoes pull back in. Is the brake pedal returning to where it should be? Might...
1 Use a 160 thermo, 2 Get the fan to about 1/2"-1" from the radiator. 3 Make sure the fan is big enough, 10" fan ain't goin to cut it.
Trans Drop the pan and change the filter and fluid. Type "F" fluid.
frontend First check and see if the 5 lug is a disc brake system. If it is, get it. If not, ain't worth the trouble. 5 lug disc setup is only...
HiPo Ok, first if is a real HiPo, and the block casing numbers don't lie, the block is a little stiffer then the regular ones. If the bottom end...
HiPo Not 4 bolt mains and not any real HP from the stock engine. Valve size is the same as regular 289s. Ports suck. Best thing is to tear it...
Holes work both ways. Dust and water can get out, but dirt and rocks can get in. Total weight reduction, probably 1# total. Then every hole you...
heads Check ebay for the heads you want. By the time you buy parts and machine work you might be able to just get them off ebay. Just a option.
frontend Gp down to a parts store and have them cross refernce between Stangs and Granadas to see which parts are the same and then order parts...
frontend several ways to go. Mustang II frontend or convert to a Fox strut frontend with R&P, I have a 66 Stang that I'm using a Fox disc brake,...
oiling Fram filters have gone down hill in the last 5 yrs due to corp changes. Wix has always been good as is NAPA/Motorcraft/puralotor, all the...
8" posi A very good buy, even if you have to rebuild the clutches. Good ratio and 8" is a strong unit.
fuel line If you really want to "be a man" have a 3/8" bung welded on the bottom of your tank. The factory fuel pickup is to small. Use Aeroquip...
fuel line 3/8" copper tubing, tubing bender and patience. Take your time and you'll be truely rewarded.
Power steering Fill the pump. Put the dip stick and start the engine for a few seconds. Turn it off and refill the pump. Run it again for a few...
Ssm yep, just how they do on. $50 is a good price.
brakes One way to find out. Go to a parts store and check the spindle part numbers for the two. If not that, check the bearing part numbers to...
Rubber and ploy have different torque specs. Torque on a bolt, stud or rod is actually just a matter of now much you stretch them. To much and...
trans ??? First off, a C-4 is a very tough trans and can be made tougher. More HP on a old trans=trans rebuild. If you're driving mostly on the...
They may have set on the shelf to long. One of the problems of an older car. The parts set for a long time before someone buys them. Bleed them a...
Separate names with a comma.
