hello from texas looking for kits, fiberglass, etc to bring my car backk from the dead im working on a 74 comet car of the gods
from Northeast Pennsylvania If you're looking for body kits like are sold for the Tuner cars, you're out of luck unless you can find a contact in Brazil
welcome from the mitten! you will see some fiberglass parts pop up on eBay from time to time... good luck
If you are going to Turbo a 250...better have some deep pockets. I don't see this mod being done on a "budget".
You can do a cheap kit for under a grand. But it probably wont be reliable. If I were doing a turbo build on a six I would go all in. As in building the engine and swapping out the head. You can still do an "all out" build under a budget. But around 3 grand. If you choose the cheap one I'd go with a T3/T4, or a big T3. It should be fun/easy to get 220RWHP and give V8s a run for their money. As for the full build a nice full sized T4(62-70mm) should get you 300-500HP. But Forced induction is way different than NA application. I suggest you check out this forum and see how much work it takes to build a turbo car. http://www.theturboforums.com/smf/the-turbo-'builds'-board/
