I just bought a 1974 Ford Maverick Grabber That I am going to rebuild. Does anyone know where I can get floorpanels from? The driverside is rusted out and the passengerside is almost there so i need both sides. Thanks for any help!!! David
from Northeast Pennsylvania No one makes new floor panels for a Maverick. You can post in the Classifieds asking for a good cut out set or do a search of the forum under "Mustang Floor" and see that sometimes new Mustang floor boards can be adapted
welcome, and yup...mustang pans are close, early 70's as I remember. just search the threads here...you will find lots of info!
You can also find a donor car for the parts. I'd suggest finding out why they are rusted out though. Most rust out because the cowls leak or the windshield seal leaks. Pour some water down the cowl vents and see where the water goes. If it comes inside the car you have a major problem. If it doesn't spray water at the windshield and see if that is leaking. If the cowl is leaking use the search feature here and see how to fix it. Good luck and welcome to the board.
