IM SO STOKED I FOUND A NEW MOTOR FOR MY CAR IT IS A 300 i6 that was beefed to hell and saw the drag stip a couple of time tyhe guy how owns it is like 80 and is selling it for 2 houndred and the best part is it is suposed to have almost 5 houdred hourse power:bananaman :bananaman :bananaman :bananaman
Ahh, good find but you know that isnt going to bolt right in your car....right? Its totally different that the 250.
There was one at the roundup,, it was cool. I asked the owner if the 300 was hard to fit and install. He simply said YES, But in the end they will fit. Dan
LOL, I think that was english. 500hp from a 300 six? You didn't mention whether the turbo or blower came with it.
If that motor is for real, I'd look for an F150 to drop it in. You will regret a move into a mav. More headaches than you need. Unless you have like, a setup like those guys on "Monster Garage".......or something.
well i talked to the guy who ownes it finaly and found out the "real" stats on it 300hourse 200 ci block that was board and it has nevere accualy sewen the strip peopl exagerate too much
if those are the correct, or close to real stats. Sounds like a real good buy. I didn't know you could get a 200 six to realize 300 ci. The 250 is the same block. So maybe it's just bored . Stroking that mill is new to me.
just how hard are we talking about to get one in? what's going to need to be done? because i'm 3/4ths of the way thru putting a 302 in and i'm about to give up and try the i6 300.. so yeah... what all has to be done to get the 300 to fit?
3/4 of the way to putting in a 302?? well.....take that amount times 2....and that wil put you about 3/4 of the way to putting in a 300-6.
By putting a 300 in the Maverick, you are putting in a longer engine. To me, longer engines are harder to make fit than a wider engine.
terry, i dissagree...i am taller (longer) than you and i fit in a mav. better than you being (wider). jmo. p.s.josh, try here...http://fordsix.com/
