Floor repair

I was looking for some cheap ways to patch a few spots in the comets floor. I noticed BUBBA BOB posted some picts that were interesting in his floor repair gallery. Does anyone know of the chemical he used to paint over the floor. It looks like some kind of liquid sound barrier.

 

didnt see the pics myself but it's prolly something like Rust-Bullett

 

Its silver in color and it looks like some kind of matt was laid down first. It almost looks like a type of fiberglass matt.

 

Check out Terry's trunk repair article

http://mmb.maverick.to/showthread.php?t=35513

 

YEA!! that looks like it. This sounds bad, I work in an auto parts store but I havent heard of this rust bullett stuff. I have rust fix in a spray can, but this looks like a roll on application. Were can I find it, how much does it usaly cost?

 

http://store.summitracing.com/egnsearch.asp?Ntt=rust+bullet&N=700+115+4294922165&Ntk=KeywordSearch

 

Rust Bullet and fiber glass CLOTH

Duct taped the underside of the holes then used the Rust Bullet as the resin for the FG cloth. Put down a layer of fiberglass, then put two layers of Rust Bullet over the entire floor. Then took the duct tape off and put a layer underneath.

 

I used fiberglass cloth and Rust Bullet to repair the smaller holes in my floor. See: http://1bad6t.com/Maverick/maverick_5.html

 

How much do I need to do the entire floor and trunk? You guys did a great job on your floors. I hope mine comes out half that good.

 

If you mean to use it as a fiberglass resin, you would probably need three quarts.

 

I got by with 2 quarts. Be sure to read the directions about how to use this stuff. And don't get none on you...it wont wash off

 

i used it on my...Cowl Repair...

......

 

Thanks for your help guys. I feel much better about taking on this job.If I run into any problems Ill let you know. Thanks