Which radiator should I get?

I have a 302 with about 400 HP and a 100 shot of nitrous. I was wondering if any one could steer me in the right direction for the right radiator.

Thanks

 

the Griffin has did well for me.

 

Did you get a universal one with close specs to the original as far as the size?

 

who was selling the brand new bolt in 3 row aluminum rads a few months ago? they were pretty cheap iirc

 

aluminum rad

a all New 2 core three row has been made at my request for racing application ,this one will cool 15% to 20 % more than the last 2 core 2 row that was made ,it is ready now and a sticky will be put up in the classified section for 1 year as an agreement has been made with Stefan to do so ,it should be up later this week P.S and much cheaper than a Griffin i guarantee that. Spillman(scott) you have a PM

 

Scott, I bought the last version of this radiator that Jimmy2Gates is talking about and love it. It's a direct bolt in with no mods. If this version is better, and I can't imagine how, then you need to jump all over it. My car never gets over 185 degrees and any kind of driving, from drag racing to Cruising The Coast which was a lot of 5 mph cruising in bumper to bumper traffic for several hours. I highly recommend these radiators.

 

I sent you my info in your PM. Thanks again.

 

I would also be interested in some of these for some other Mavericks. Are you saying the tubes are 2 inches with 3 rows of them? If so these should hold a good bit more coolant than the 2 row version.

 

Radiator

There is a radiator supply company in Ft. Worth, TEXAS I have used for years. Prices are good and radiators have lifetime warranty.
Advantage Radiator Sales, 817 367 7101.

Last Saturday I priced a new radiator for a 1995 Dodge 1500 Truck @ $109.50.

Also 1800Radiator has good prices and will deliver same or next day to your door. I800radiator had the unit in stock and delivered it to me Saturday @ 1400 hrs.

At either place tell them Jack at Aledo, Tx. referred them to get best discount.

I hope this will help some folks.

Texasjack

 

are these aluminum rads ,the ones ive hadproduced are a direct bolt in aluminum that were built for our cars (69.5 to 77 ) Maverick and Comet . THEY ARE TOP NOTCH AND WILL COOL UP TP 500 + HP

 

I would still be intrested in these answers.

 

new 2 core -three row Aluminum rad

Blown 5.0, a sticky will be put up in the classified section by the end of this week with a full discription of width -lenght ,core thickness ,how many tubes ,how close the tubes are ,how many cooling fins ect ,ect.,again this rad was built as a more racing version of the last one that was sold here by the same distributor. I believe that more than 60 were sold with not one complaint and every purchaser had nothing bad to say about them . I know of two members on here who have purchased this new rad in the last week ,so we will be hereing of its looks and performance soon.

 

Looks like your going to have to wait for the sticky to get the icky lol.

 

Could someone post where this sticky is, I cant find it. Thanks

 

I don't even know what a sticky is.