does anyone out there have a wire diagram for the dash. the wires going to my fuse box and out to the specific area was burnt in my car and now i cannot find where certain wires go to to reconnect new ones. perticularly the yellow and black wire. does antone know where it goes inside the dash. someone that had my car before me jay rigged the wiring in my car and a fire started in it because of that. so if anyone can help with a guide or a diagram or something i would appreciate it very much....
Go to Mark's site www.maverickcomet.com the wiring diagrams are under Features and then wiring diagrams
haveing trouble reading the diagram. okay got the wire diagram and now here is another question i have a yellow with black stripe in it that got burnt in my fire it comes out of the the thirds slot down on the left hand side of the fuse box and where does it go to. and as well i also have a solid brown wire that comes out of the 1rst slot in the top left of the fuse box where does it to go.these wires are loose and bunrt i ahev to replace but have no idea where they ariginally went if there is anyone else out there to help i would appreciate it very much.
Are you sure it is not Lt Green and Black? And are you sure you don't have the descriptions backwards. The diagram shows a Brown (parking lights) at position K and Lt Green/Black (High Beams) at position D on the block (bottom center page 1)
im positive and that is why the diagram is very confusing. Those two green wires are next to it. they go into a different part of the fuse box.
Are you describing the wire position from a engine compartment view? You probably going to need to split the loom open and trace the wire to it's destination. Or find a donor harness.
Did you read this for help http://mmb.maverick.to/showthread.php?t=23262&highlight=posting+pictures Another image resizer is listed in here http://mmb.maverick.to/showthread.php?t=28026&highlight=resizer
maybe anyone know where i can get the wiring does anyone know where i could get all new wiring so that i maight be able to rip it all out and start from scratch. the diagrams and the wires don't match. and my internet hook up is to slow. sorry.
