I NEVER KNEW U COULD BUY THE C4 TRANS DIPSTICK AND TUBE AFTERMARKET UNTIL I RAN ACROSS IT IN THE JEGS CATALOG. MUST HAVE NEVER PAID ATTENTION TO IT ITEM NUMBER:397-M-6750-D303 AT JEGS.COM
I have one that came with my Performance automatic supercomp. Its a locking style dipstick very nice unit it can be purchaced through P.A. directly or other aftermarket companys. It cost around $60 bucks though..........
i can use the nome my dip stick goes into the pan of the tranie do any of yall know where i find one of those
What you have is a C-5 trans out of a truck or van. Uses almost the same inside parts as a C-4 but is a heavier duty trans than a C-4. If you look at the trans you have the bell housing bolts to the trans case, it does not use the front pump bolts to hold it on and the dip stick goes into the pan. The C-4 trans uses the front pump bolts to hold on the bell housing and the dip stick goes into the trans housing just above the front passenger side corner above the pan. If you can not find one in a salvage yard you will probably have to make one. If your stick housing is short (come up just behind the passenger head) it is out of a truck. If it is long (comes out up more in the middle of the passenger valve cover) it is out of a van. The best place to find the part you are looking for is in the salvage yards core pile where they put all of the transmissions that they take out of cars that they do not intend to sell. I am moving shops right now but when I get orginized I think I have one for a short tube. If I do I will let you know.
ATI transmissions (performance parts) has a replacement locking dipstick & tube for the pan fill setup. also have the conversion kit for if you want to add a deep alum pan on a pan fill.410 298 4343 or 800 284 3433
c4 pan fill tranny could someone tell me what this tranny is out of originally ford case nbr D5op7006AA was told a 70-72 Maverick. I need an original dip stick pan fill someone left it out. or how long is it.. thanks also would this be a heavy duty trans ?
numbers starting with D is 70's. second number is year. so i think this is a 75 tranny. usually the pan fill trannys were used in trucks.
TRANSMISSION CASE NBR D5OP7006aa PAN FILL Then maybe I should go to a TRUCK site for this dip stick, because I get seem to go no where on the Maverick site or Ford Six inline
http://www.coanracing.com/Catalog.asp?CatClass=07TU Bottom of the list for either dipstick. $38.00s isn't a bad price IMO for a locking style dipstick. Good Luck part numbers COA-73400DIPSTICK & TUBE, PAN FILL W/LOCKDOWN HANDLE$37.50COA-73401DIPSTICK & TUBE, CASE FILL W/LOCKDOWN HANDLE$37.50
tranny D5OP7006AA pan fill That is very good suggestion, however i am retired and of the old school, I LIKE ORIGINAL PARTS to old items. Does anyone know if there is a site for ford tranny nbrs ? If this trans is from a 75 Ford truck what model ? Can anyone help ?
