vacume/electrical

ok so call me stupid but I'm in need of some good vacume and electrical diagrams for a 74 comet with a 250. Swapped engines but I'm having extra vacume lines from engine to engine. plan is to pull all lines off of original and just rerun them on the new but I didn't label very well where lines go....ok so only labled one line and help would be appriciated:confused: Heeellppp!!!

 

Check this out....

Go to maverickgrabber.com At the home page (after images are preloaded) go to tech articles and then wiring diagrams. It will help you a lot. I think it says that they are for 70-73 Mavericks, but I still feel that they would help you get most of the tubes and wires hooked up. Hope this helps. If you want a set of wiring diagrams for yourself, ebay usually has some posted. Good luck. If you have any more questions please don't hesitate to ask. Thanks.
-Corbin

 

Hey tuped!! Is your swap like for like? What year? I may be able to help you out.

 

ok yeah...so I didn't mean letterally call me stupid butthat's ok...probly deserved in this instance. I swapped the original I6 250 ('74) for a I6 250 from a '79 monarch...only differance is the carbs....

 

This is a diagram I did from my 76 with 250.

 

Here is a copy from the book for 250 non/air cond.

 

250 vac system

 

does anybody have a diagram on how to install carburetors on a 76 mav? I dont know where all the hoses fit. I think i'm missing a hose on the egr valve. cant find a repair manual anywhere

 

Wiring diagrams... http://1bad6t.com/Maverick/repair/chassis_electrical_05.html

Its according if you have an automatic or manual transmission, A/C or non A/C and other emission components. You have 6 different '74 vacuum diagrams to choose from... http://1bad6t.com/Maverick/repair/74Vac.html

 

http://1bad6t.com/Maverick/repair/fuel_system.html
and
http://1bad6t.com/Maverick/repair/emission_controls.html