Yep - what yellow 72 said . But I'm not sure wich term. to hook it to. Anyone out there know? Hope that is it.
Basically it needs to be a hot when switch is on. If you want to run a wire to your fusebox you could come off the wipers, fan, radio fuses. Or you could probe wires and connections under the hood while switch is on. I would go to the fusebox. If you do go to the fusebox go to the dead side of the fuse for fused protection of your new circuit. If you dont know what the dead side is, it is the side that will not carry juice if the fuse blows, usually the right side of the clips that hold the fuse. Dan
My fuses arent labled anymore. does anyone know which fuse is for the radio/fan/wipers? Thanks Dan, I think Ill do that unless anyone else has some other ideas... heck, ill try anything right now!
Upper right corner - Radio Lower right - heater I wipers are protected by a circuit breaker on the switch