hi, i got trash in my injectors again.. the setup i have is: the original pickup in tank fuel filter fuel pump fuel filter at last injectors HAMBURGERS 3341 is the type filter i have, looks like 15 microns on both. http://www.summitracing.com/parts/ham-3341 do i need a smaller micron? or a different filter if i remember they are stainless screens in both not the paper element. I'm cleaning out my injectors tomorrow evening and try it again
I dunno what the flow rate or filter ability is for the stock EFI filter but that's what'd be on mine... The stock filter worked on my supercharged Marauder that was pushing around 50 PSI into 36Lb injectors...
I would look at the condition of the line between the pump and the injector. Are they rusty originals or deteriorating rubber? Also, what is your return line? Is it going back to the tank or are you looping it back into the feed line? What is the condition of this line? Micah
ive always used a 100 micron prefilter and a 10 micron post pump filter. what is plugging up the injectors? rust? rust will go through all metal mesh type filters. i use a paper element in the post filter. i have used the aeromotive ones and the mallory ones with great success.
