Has anyone used the Modern Driveline hydrualic kit with a 77 year model ?

Looks good....

 

Tight fit! Good job!

 

Well I've been bleeding the crap out of it, seems to have all the air out,but can't get any pedal effort built up and no movement in the T/O bearing. Hope I don't have to pull this thing out to get the T/O bearing rebuilt. It's been hangin for several years now, but closed up with the lines connected to each other. I guess I shoulda checked it out before installing it in the bellhousing.. Got a damned mess under the car from all the spilled brake fluid. Good thing this ain't a show car either. The Ranger used to be a pain to bleed the clutch too.

 

same boat

I am working on my 72 with the modern set up...not enough master cylinder travel. They will be sending me out another master with a larger bore to help increase the travel...I am dealing with Paul also.


John

 

I got mine working a couple weeks ago. Everything's fine except for the firewall flexing. I'm going to fab a internal bracket like the one used in Mc Cleod's kit ( go to Summit Racing's site for pics) to stiffen the wall.