Separate names with a comma.
well I can say that the 65 comet/fairlane are a smaller car than the 66 version but like it has been said it can be done here is a picture of my...
No actually it's a 9" narrowed up to factory 8" width.......but it is the same diameter tube as the 8" and they basicaly have the same axels...
no not tested yet but sometime this summer.......but here is the rundown.....the rotors are front top hat rotors for a 88-92 jeep cherokee 11" the...
do you still have the 77 parts car you pulled your 302 from?? did you use the front disk brakes from it under your car?? and did you use the 8"...
Just another imput.......if you use a wire feed have some one hold a flat piece of brass against the outside of the hole and weld it from the...
Not a problem......I hope it all works out for ya this time:P
Oh just some looser from Indiana.........:D I had thought about posting that the corner of the other mav belongs to Squeal
yes it is a 460 on that car they shaved the shock towers by the inner fenderwells and re atached them........but they are also running coilover...
Time and learning YES but Money is not that much as long as you do it your self and take your time........just my 2 cents.......I bet I'll spend...
I plan on it as well.....as long as I can get it back together in time:(
I bougt one of those dash covers off of ebay and it looks great....and you have to look real hard to see it.:)
and the other:)
here is how I did mine.....
Well Rick here is another idea that we used on 4x4's to lift em.......but you could use it to lower one as well..... Take a piece of 2x3...
well I forgot to get the part #:D if you need it I'll get it later today...but they are motor might brand and they are 2 1/4" wide and 5" long...
Hey Rick I bought a set at Auto Zone (I used them to lower the rear of my car to achieve the ride height I desired before I mounted the ladder bar...
Hey Dan do you have any pictures of the cut out the stone guard?? I need to do that stuff to mine as well......and did you ever get your rear disc...
It is a twist type and Dennis thats what I was thinking too:D
Well I just wanted to have one for my own saftey......but I will figure out a way;) I have done my best to hide as much as I can on my...
