Separate names with a comma.
Just wanted to post a followup for the next guy down the road with similar issues. Here are the pics of the crack. At first it looks like a normal...
no.. its seeping into the secondary throat through the wall between the secondaries and the float bowl, about halfway up. I have a call into...
Its got a standard stock mechanical pump feeding a Holley pressure regulator set to 2.5 - 3 PSI.
I don't have access to the donor carb at this time. It belongs to a friend. Here's some pics of the one I'm working on. I've come to the...
This particular model Holley has no external float adjustments or a sight plug. It's a lower end version of the 4160 I believe. I swapped the fuel...
We put new needle and seats in. Checked float levels. This carb has non adjustable floats. They have to be set dry with the bowls off.
I installed a used (less than 5000 miles) Holley 4 barrel that floods after the engine is shut off. Carb has been rebuilt to try to solve this...
I believe the calipers will fit either side but are not the same. Make sure the bleeder valve is at the top on both sides or you'll never get all...
