ethanol is alcohol
i had one catch on fire and burn so ill never buy another
wrong petronix kit? maybe a 8 cyl magnet im not a fan of them personally
i got one too but for my 57 :huh:
thought about it, slow go rusty money pit
shouldn't be any clearance issues, I had a th350 in mine
you use a second short side axle it isn't quite 3" shorter more like 2-7/8
ran it for a few.... thinking about throwing it on epay
be easier to redrill the mounting holes
damage is done replace pump and use proper fluids and flush the system
4 will work but not ideal would be ok for a driver 5.5-6.5 psi on a carter/edelbrock
do a duraspark swap im running a duraspark distributor with a msd box and coil on mine but a stock 74 up duraspark setup would be loads...
star lock washer under the bolt? just a idea never seen a pedastal mount back off maybe the bolts are weak and stretching?
a header and good exhaust will be the best money spent, aong with a good ignition and electric fan
did you flush and bleed the system? assuming you used a high quality type f trans fluid as required?
Im saying i would never use it as it is being used it's a proven fact frank that uncatalized paints outgas for long periods of time. food for thought
Let me play you a scenario You have this uncompatible substrate that you sprayed under all our hard effort in body work and expense of paint and...
for the reasons below
not a good idea imho better off with a 2 part epoxy
drive drive drive
Separate names with a comma.
