all the cars I've built have been manual, this is my first time f'ing with an automatic as you can probably tell ;) torque converter is flush to...
Having issues, we ordered a 157t 50oz SFI rated flexplate from ebay, and the flexplate fits in the bellhousing, the torque converter bolts all...
ah I think I get it, I need to pull the flexplate and check the stamping on the crank to determine the balance, then order a 157t flexplate for...
Swapped an `85 Mustang GT 5.0 (non-roller, cfi, we changed the intake manifold for an edelbrock 4 barrel) engine into the `73 maverick. Tried to...
found this image in another thread, it's a granada shifter cable - [IMG] this should give all the clearance I need and with a bracket mounted to...
Helping my brother in law fix up his maverick with a new motor... Anybody have pictures of clearance or modifications done? It looks like I need...
I have a set of 94-04 offset stock mustang 17x8 wheels I'm looking to put onto a `73 mav, it's a stock 4 wheel drum 302/c4 car with the stock...
Separate names with a comma.
