Separate names with a comma.
the motor is a 92, i was just told in 90 they block size went up. is this true? the headers are hitting on the shock tower. i put hookers on it...
Would it be better to just mod up the stock 200 than swapping for a 300.
i was wondering how big a difference is the 302 vs the 300i6. I was going to swap a 200i6 for a 302 but can't get it to fit no matter what i cut...
I have an AOD and don't know if its an AOD-E. How can you tell which one it is. If its an AOD-E where do the wires plug into from the trany.
what year of Mav is it
I'm going to have a Hurst floor shifter nicee. Do u know if the hooker 6901 are any thinner i mean don't pertrude so far out from the black as...
do you know which brands.
Ok I was putting the 302 in today and the exhaust maniflod hits the shock towers. Will after market headers be smaller.
did you use the stock motor mounts. because mine arn't even close to being right for a 302. do you know anywhere to get motor mounts
Where is Autokrafters located or a phone number would be great.
I am currently swapping my 1970 mav 200 for a 302. I can't find any motor mounts to bolt to the mav that will take the 302. If anyone has done...
how would u shorten the drive shaft length.
Did the stock drive shaft length match up. I am waiting to find out if it will work so I don't have to get a new one before I drop mine in.
I am swapping my I6 to a 302. The 302 has an AOD on it. Will the drive shaft length on the mav work with the AOD
where u located at.
I pulled the six out today. It was incredibly easy for my first one. If I was to use the aod and modify the tunnel will the drive shaft on the...
If i have too which trany should I swich too if the AOD won't fit.
I am going to swap to a 302 also. Again the motor is EFI but I think it will be cheaper to go carb. CAn I take the bell housing off the aod and...
thanks looks like I'm going to have to get a different bell housing seperate. Will the bell housing of the AOD bolt onto the stock trany of the...
OK I found a 1991 302 EFI out of a Grand Marquis. I was just going to take the trany with it, will the drive shaft from my 200ci work. And how...
