Looking for a picture of a grabber hood scoop nut

I am looking for a picture of what the grabber hood scoop nut looks like.

Thanks

 

http://mmb.maverick.to/showpost.php?p=708086&postcount=5

 

Mine were a stamped steel acorn nut. I can dig around and see if I can find one. I could not locate any "new" ones when I did my car, all the ones for Mustangs were different.

 

I have 2 different styles and I thought I was going crazy. Are they both factory? Do you know the size of the pin on the scoop? I am not at home and I am trying to locate some hardware for it.

 

Mine were factory as far as I could tell, the hood was original paint. They had a tar like sealer on the inside of them, and they cut their own threads. That was the issue I had, all the reproduction ones I found, were machine screw threads.

 

All of the ones I have seen are acorn nuts as well. I also could not find anything "new" that was the same.

 

Ford Parts Manual shows part # 382309-S. Seems they are available from AMK.

http://www.amkproducts.com/bulk3.asp?part=B-12973

Exploded view:

http://www.1bad6t.com/Maverick/repair/diagrams/untitled110.gif

 

I'm pretty sure that's what I bought, and they didn't work. I can pull them out and have a look, tomorrow...it's too crappy out to venture to the garage.

 

I think Brian may have it, I looked at mine they are B-12939, which at the time were the only one's I could find that even looked similar. Sorry for the crappy phone picture, but this gives you the idea...I left my camera cable on the cruise ship

 

I ordered some. I will let you know.

 

If they are, I'm going to order some also.

 

Finish is not original but the nuts absolutely are.

Micah

 

Thanks for the picture. That is what I needed. Does anyone know if the other nut that was mentioned ever installed from the factory? I had one of each type one two different hoods.

 

Here is my picture.

 

To all that was wondering, especially Dave, they are correct and they installed with zero issues.

Here is mine installed. Another found item for our cars. Thanks Brian!!!!!!

Thanks to Craig and 71MAvrk for the pictures!!!